Up Mini Helpful Tips and Tricks

From WSU Technology Knowledge Base
Revision as of 18:02, 13 April 2016 by Ewright (talk | contribs)
Jump to: navigation, search
Raft peels up from perfboard

The platform height needs recalibrated.

Object is peeling up from raft

This could be a heat issue. Ensure that the door and lid are both kept closed throughout the printing process.

Air printing

The extrusion nozzle is clogged. Contact IT 507 457 5240 option 2. Eric Wright

Model falls off raft or perfboard.

The space where the model makes contact with the surface below is too small. Build a small coin shaped disk below your model to make the raft larger and secure the raft and model to the perfboard. ;LinkToDemo of this.

There is not support at x
.024 y:.054  :

Some part of the model either floats above the printing surface, or passes through it. Use “Auto Placement “ to have the software align the model appropriately.