Up Mini Quickstart Guide

From WSU Technology Knowledge Base
Revision as of 19:51, 13 April 2016 by Ewright (talk | contribs)
Jump to: navigation, search

Power On Printer

Power switch is on rear of unit.

Power Switch

Open UP software

UP3D Logo

Connect the printer to your computer via USB cable

Initialize Printer

In the 3D Print Menu Select 'Initialize'.



Open the setup Dialogue, Then close it by clicking "Continue".


Calibrate Platform

Calibrate Platform

Load your object(s)

File, open, select your object file. It will be in .STL format

Arrange or scale your object(s)

To arrange a single object for immediate printing click "Auto Placement"

To move, rotate, or scale your object, select the action required from the options at the top of the print menu.

Select the amount or increment of your move, then click the Scale, Rotate, or Move button toward the bottom.


From the 3DPrint menu, select Print.


Printing may not begin immediately as the platform and print head must warm up before printing. Once printing begins, look at the platform to ensure extruded material is adhering well to the print platform. If it is not, you may need to [recalibrate platform: ]