Difference between revisions of "Draft:DLC Spring 2018 Class Projects/Jing Han"

Revision as of 19:26, 4 January 2018

Project Details

The MGMT 477 video project is designed to provide students the opportunity to create a seamless video to present your research project as a group. Each group member will submit their slides to the group member who is designated the "Group Producer" of your video. Once all slides are turned in to the Group Producer they will upload the complete presentation to a tool called Voicethread and share the link with the rest of the group. After you Register a Voicethread account you can use the webcam tool to record your section(s) of the presentation. Once all the group members have recorded their section(s) the Group Producer will embedded the Voicethread video to a D2L BrightSpace Discussion Board. The directions for this entire process are provided below. However, the following video provides an example of the Voicethread video for you to better understand the project.

Sharing Video in OneDrive

Hardware/Software

Voicethread
D2L BrightSpace Discussion Board

Registering an Account with Voicethread

All group members will need to create a free Voicethread account to complete this project. The following directions walk you through the registering process.

Go to https://voicethread.com
Fill out the Register a new account form making sure to check the "I'm not a robot" box. You are strongly encouraged to use your WSU email address.
Select the Register button and an email will be sent to the your WSU account that will have an activation link that you will need to use long into your new Voicethread account.

Embeding Voicethread video into D2L Discussion Board

For this project you will be embedding your Voicethread video into a D2L Discussion Board and the following step-by-step directions explain this process.

Withing the Voicethread menu you will select from the embed code option (See figure 1) and select the Copy Embed Code button to save on your clipboard.

Fig 1. Embed Code

Log into the D2L course, access the Communication menu, choose Discussions.
Click on the Group Video Presentation topic for this assignment.
Select "Start a New Thread" button and add a description for your thread.
Finally you will need to select the Insert Stuff button (see figure 2) and choose the Enter Embed Code option and paste the copied content from your clipboard and select the next button.

Fig 1. Insert Suff

DLC STARS/Presenter

Chad Kjorlien

Resources/Helpful Links

Other Resources

DLC Support

Phone: 507-457-2206
Email: dlc@winona.edu
1:1 Support: Krueger Library #105

@@ Line 1: / Line 1: @@
 ==Project Details==
 {{TOC_Float_Right}}
-The MGMT 477 video project is designed to provide students the opportunity to create a seamless video to present your research project as a group. The individual components of this video will created by each member of the group using CaptureSpace Lite and merged into one comprehensive 15min. video that will be uploaded to MediaSpace and then posted to a D2L BrightSpace Discussion Board.  The directions for this entire process are provided below.
+The MGMT 477 video project is designed to provide students the opportunity to create a seamless video to present your research project as a group. Each group member will submit their slides to the group member who is designated the "Group Producer" of your video.  Once all slides are turned in to the Group Producer  they will upload the complete presentation to a tool called Voicethread and share the link with the rest of the group.  After you Register a Voicethread account you can use the webcam tool to record your section(s) of the presentation.  Once all the group members have recorded their section(s) the Group Producer will embedded the Voicethread video to a D2L BrightSpace Discussion Board.  The directions for this entire process are provided below.
+However, the following video provides an example of the Voicethread video for you to better understand the project.
-==Hardware/Software==
-* [[CaptureSpace Lite]]
-* [[MediaSpace]]
-* Merge Video Tool
-* D2L BrightSpace Discussion Board
-==CaptureSpace Lite==
-The tool you will be using to capture your screen and audio content is called CaptureSapce Lite. This tool is a part of the MediaSpace services and the directions for recording, editing, and uploading the video with CaptueSpace Lite are found below.
-===Recording in CaptureSpace Lite and Uploading to MediaSpace===
-'''Step 1:''' Go to http://mediaspace.minnstate.edu/ and login with your STAR ID.
-'''Step 2:''' Select '''Add New''' in the top right corner and select '''CaptureSpace Lite''' from the dropdown. This will launch the desktop recorder. ('''NOTE''': If you have not used CaptureSpace Lite before you will have to download the recorder. Select the correct version for your computer and download the application. It may take a few minutes to download. Once downloaded go back to Mediaspace and complete Step # 2 again)
-<br />[[File:Capturespace 1.jpg|center]]
-'''Step 3:''' The recorder has 4 recording options. Select the '''SCREEN &amp; WEBCAM''' option in the top right corner. Your selection will determine whether you record your screen, webcam, or audio.
-<br />[[File:Capturespace 3.jpg|center]]
-'''Step 4:''' Select the '''FULL SCREEN''' button on the next page, and then select '''RECORD'''.
-<br />[[File:Screen Capture full screen.jpg|center]]
-'''Step 5:''' A countdown will appear on the screen and your image in the corner. Select your PowerPoint and put the PowerPoint into slideshow. This will have the slides fill your entire screen.
-'''Step 6:''' Next position your webcam by clicking and dragging it to where you would like it to be. You will want to make sure you do not cover up any of your photos or text on your slides. You can also adjust the size of the web camera by drag the edges of your image to make it larger or smaller.
-'''Step 7:''' Once your camera is in the correct position click on the PowerPoint slide and start your presentation.( '''NOTE:''' You will want to make sure your PowerPoint is selected so you can advanced the slides)
-<br />[[File:Click on PPT.jpg|700px|center]]
-'''Step 8:''' The recording panel helps you control the recording process.<br />[[File:COntrol Panel.jpg|center]]
-* If during your recording you need to pause, select the '''PAUSE''' button from the control panel below the video.
-* If you would like to start your recording over, select '''CANCEL''' from the control panel. Selecting '''OK''' on the next screen will permanently delete your recording.
-* If you would like to draw on your slides, use the '''DRAW''' controls to configure your tools.
-'''Step 9:''' When you are done, click '''DONE'''  on the control panel to save a copy of the video on your computer and present a preview screen. At this point, you can perform simple edits to the recording.
-<br />[[File:DONE Recording.jpg|center]]
-'''Step 10:''' To cut the ends of your video select '''TRIM''' from the left column of the timeline. Pull the blue dots/handle from each side of the video timeline so only the section when your PowerPoint was in slideshow view is between each end. The sections that are grey will be cut from your video.
-<br />[[File:TRIM Feature.jpg|1000px|center]]
-'''Step 11:''' Next select '''APPLY''' in the bottom right corner to apply the edits.
-'''Step 12:''' Your new video will launch. If you are happy with your video, select '''DONE''' in the bottom right corner.<br />NOTE: If you would like to start over select '''CANCEL''' and then '''PREVIEW'''. This will launch your original video and you can start editing again.
-<br />[[File:Apply Changes.jpg|1000px|center]]
-'''Step 13:''' Next title your video and select '''UPLOAD'''. This will store the video in your MediaSpace account.
-<br />[[File:UploadOptions.png|center]]
-'''Step 14:''' Once the process is completed. It may take a few minutes for your video to appear in MediaSpace. (If it has been more than 5 minutes and your video has not appeared in MediaSpace, try refreshing your page or logging back in.)
-==Downloading Video from MyMedia and Sharing in OneDrive==
-So you captured video with CaptureSpace Lite and uploaded that video to your MyMedia area of MediaSpace.  Now we need to download that file and share it with the group member who is merging it together with your other group members videos to form one comprehensive video for the group. Below are the directions for downloading and sharing that video to your OneDrive.
-Access MediaSpace and go to your My Media section and click on the name of your video that you will be downloading and sharing with your group member.  The following steps walk you through the process of downloading this content to your laptop.
-'''Step 1:''' From the Actions below your video select the Edit option.
-'''Step 2:''' Choose the Download tab and choose the Source checkbox.
-[[File:Select Source.jpg|600px|center]]
-'''Step 3:''' Click on the Download button that is in the bottom right corner of the video player (see image below).
-[[File:Download MPG4.jpg| 400px|center]]
-'''Step 4:''' Save the .mpg4 file locally on your laptop so that you can share that to your OneDrive.
-'''Step 5:''' From your preferred browser go to [http://sky.winona.edu http://sky.winona.edu] and login with your StarID and password. Click on the OneDrive icon.[[File:Panel.jpg|center|600px]]
-'''Step 6:''' Once in your OneDrive select the Upload button at the top and choose your video file from your laptop directory.[[File:OneDrive Upload.jpg|300px]] '''Important:''' video files are typically very large and will take some time.  Make sure you are on a good internet connection when uploading these files.
-'''Step 7:''' The following video shows how to share the video file you created with your group member who will be merging these into one movie.
 {| style="width: 100%; align: left; "
 |-
 |
-{{#widget:YouTube|id=Sd0aQzM4CBk}}<br />
+{{#widget:YouTube|id=yAc4aKboKhg}}<br />
 ''Sharing Video in OneDrive''
 | style="width: 40px; " |
 |}
-==Merging Videos==
+==Hardware/Software==
-For this project you will need to have one person who takes each of the individual videos that group member creates and complies these into one comprehensive video.  You will need to first share these videos with the member of your group that is doing this process on their laptop.  Remember, video files can be much larger than you would see with other documents so you may need to use a external hard drive, memory stick, or cloud storage (see OneDrive above).  It is strongly recommended that you use your OneDrive for this sharing so that you all have these videos stored somewhere other than your laptop and easy access to these files in the future.  In the following sub-sections you will learn how to pull the individual files from your group members and merge these videos into one seamless video.
+* Voicethread
+* D2L BrightSpace Discussion Board
+==Registering an Account with Voicethread==
+All group members will need to create a free Voicethread account to complete this project.  The following directions walk you through the registering process.
+# Go to https://voicethread.com
+# Fill out the Register a new account form making sure to check the "I'm not a robot" box. You are strongly encouraged to use your WSU email address.
+# Select the Register button and an email will be sent to the your WSU account that will have an activation link that you will need to use long into your new Voicethread account.
-===Using the Merge Video Tool===
+===Embeding Voicethread video into D2L Discussion Board===
-To merge your videos into one comprehensive group video you will need to follow the directions below using the Merge Video tool from Aconvert.com.  Before launching the merge tool, download the video files from you group member to a single project folder on your laptop.
+For this project you will be embedding your Voicethread video into a D2L Discussion Board and the following step-by-step directions explain this process.
-The merge tool can be found at https://www.aconvert.com/video/merge/ and the following video explains how to use this tool.
-{| style="width: 100%; align: left; "
-|-
-|
-{{#widget:YouTube|id=vONC844AdXc}}<br />
-''Using the Merge Video Tool''
-| style="width: 40px; " |
-|}
-==Posting from MediaSpace to D2L Discussion Board==
-For this project you will be posting your video to a D2L Discussion Board. The following article provides step-by-step directions for posting your video to the D2L BrightSpace Discussion Board.
-* [[Posting_from_MediaSpace_to_D2L_Discussions| Posting from MediaSpace to D2L Discussions]]
+# Withing the Voicethread menu you will select from the embed code option (See figure 1) and select the Copy Embed Code button to save on your clipboard.
+[[File:VT embed.jpg|right|frame|Fig 1. Embed Code]]
+# Log into the D2L course, access the Communication menu, choose Discussions.
+# Click on the Group Video Presentation topic for this assignment.
+# Select "Start a New Thread" button and add a description for your thread.
+# Finally you will need to select the Insert Stuff button (see figure 2) and choose the Enter Embed Code option and paste the copied content from your clipboard and select the next button.
+[[File:Insert_stuff.jpg|350px|right|frame|Fig 1. Insert Suff]]
+#
 ==DLC STARS/Presenter==
 *Chad Kjorlien